** IMPORTANT **
|
This article covers Camera and Microphone Permissions for:
- Edge Browser
- The 'Join a Meeting' Screen - Allowing Your Camera & Microphone
- The 'Join a Meeting' Screen - When Your Camera and/or Microphone are Blocked
WHEN YOUR CAMERA AND MICROPHONE ARE BLOCKED ON EDGE
Go to the 'Permissions' screen using one of the following two methods:
Method #1: Click the icon to the left of the site address, select 'Permissions for this site', then click here to jump ahead to the 'EDGE All Permissions screen', OR
Method #2: At the top-right of the screen, click the 3 dots (found below the exit 'X'), then select 'Settings'.
On the 'Settings' menu, select 'Cookies and site permissions'.
EDGE 'All Permissions' screen:
Select 'Camera'.
If 'https://virtualvisit.saskatchewan.ca' appears under 'Block' (as shown below), click the 'garbage icon' to remove the site from the 'Blocked' list.
Go back to the previous 'Permissions' screen and repeat these steps for 'Microphone'.
Now, when you tap the lock icon to the left of the site address, you will see that 'Camera' and 'Microphone' are 'Allowed'.
ALLOWING YOUR CAMERA AND MICROPHONE FOR THE 'JOIN A MEETING' SCREEN
Step 1 - Start a video meeting or, if an invited participant, proceed to join a virtual meeting you are scheduled for or invited to.
Step 2 - You will be prompted to 'Allow' your camera and microphone on Edge for this website. Click 'Allow' for each.
It is highly recommended you DO NOT CLICK 'Block'. If you block either one, you will not have access to BOTH the camera and microphone in your video meeting and will have to follow the steps above under, 'WHEN YOUR CAMERA AND MICROPHONE ARE BLOCKED ON MICROSOFT EDGE'.
- You will observe the video preview and microphone visualizer.
- You may change your camera or microphone (optional).
- You may 'Run Pre-call Test' (optional).
- You may enable/disable the microphone & camera for when the video call starts. Note: if a user is currently on the phone that is being used to join the video meeting, our platform will automatically disable the video call audio, to allow audio to continue on the phone call. The user does not need to 'uncheck' the 'Enable microphone when the meeting starts' box before joining the video meeting.
- If not already entered, add your Meeting ID and Passcode.
- Enter your name to identify yourself to the meeting host.
When ready, click 'Join'.
WHEN EITHER OR BOTH YOUR CAMERA & MICROPHONE PERMISSIONS ARE BLOCKED FOR THE 'JOIN A MEETING' SCREEN
You will receive an error message:
It is recommended that you enable your camera and microphone by following the steps above under, 'WHEN YOUR CAMERA AND MICROPHONE ARE BLOCKED ON MICROSOFT EDGE', then click 'Reload Page'.
However, you may proceed to the 'Join a Meeting' screen AND join the video meeting without your camera and microphone enabled, by clicking 'Continue without audio or video'.
On the 'Join a Meeting' screen:
- You will NOT observe the video preview and microphone visualizer.
- You will NOT be able to change your camera or microphone.
- You may 'Run Pre-call Test', however the camera or microphone will not be accessible.
- The microphone and camera check boxes will not have an effect once you enter the video meeting.
- If not already entered, add your Meeting ID and Passcode.
- Enter your name to identify yourself to the meeting host.
When ready, click 'Join'.
- Others will not see or hear you, though you will be able to see and hear them.
- You will not be able to access or turn on your camera or microphone.
For additional camera and microphone information relating to your WINDOWS desktop/laptop settings, refer to this article:
WINDOWS DESKTOP/LAPTOP - General Video & Audio Permissions/Settings